Fujitsu MB2145-507 사용자 설명서
20
CHAPTER 2 CONNECTION AND SETTINGS
2.4
Connecting the External Probe
Connect the external probe to the external probe connector on the front of the
emulation pod.
emulation pod.
■ Connecting the External Probe
Figure 2.4-1 Connecting the external probe
Before connecting or disconnecting a cable, turn off the power.
Failure to do so may cause an electric shock.
Failure to do so may cause an electric shock.
When disconnecting a cable, hold the cable by the connector case. Do
not pull on the cable.
Doing so may break s wire in the cable.
not pull on the cable.
Doing so may break s wire in the cable.
CAUTION
Prohibition