Crane Merchandising Systems 677 사용자 설명서
View Machine Data
HDC II Programming Guide
6730018
63
July, 2003
VIEW CUP RING CYCLES RELATED TO SUREVEND™
(NOT SHOWN IF ZERO)
1.
Press
, then press
until the display shows
SV.TOT XX. XX
represents the number of vends during which more than one ring cycle was
required to successfully dispense a cup.
required to successfully dispense a cup.
2.
Press
to clear the count.
3.
CONTINUE.
VIEW TIMES NO CUP WAS DETECTED AFTER A CUP
RING CYCLED
(NOT SHOWN IF ZERO)
RING CYCLED
(NOT SHOWN IF ZERO)
1.
Press
, then press
until the display shows
SV.FL1 XX. XX
represents the number of times a cup was not detected after ring 1 cycled.
Check the cup ring adjustment (see the Operator’s Guide), or the cup stack
for damage if the count is excessive.
Check the cup ring adjustment (see the Operator’s Guide), or the cup stack
for damage if the count is excessive.
2.
Press
to clear the count.
3.
Press
until the display shows
SV.FL2 XX. XX represents the num-
ber of times a cup was not detected after ring 2 cycled. Check the cup ring
adjustment (see the Operator’s Guide), or the cup stack for damage if the
count is excessive.
adjustment (see the Operator’s Guide), or the cup stack for damage if the
count is excessive.
4.
CONTINUE.
VIEW HOME SWITCH USAGE RELATED TO
SUREVEND™
(NOT SHOWN IF ZERO)
SUREVEND™
(NOT SHOWN IF ZERO)
1.
Press
, then press
until the display shows
WO.SV XX. XX
represents the number of times home switches were used due to
OPT’N SURE.V selected but not working.
2.
CONTINUE.