Philips HR1744 사용자 설명서

IMPORTANT: Do not remove the filter before you have poured all
liquid out of the Blender. If you do, the contents of the filter will fall
into the remaining liquid in Blender Jar.

Particularly when you are processing large quantities, we advise that you
do not put all the ingredients in the filter at the same time. Start
processing a small quantity, let the Blender run for a moment, switch it
off by pressing the “O” button and then add another small quantity.
Repeat this procedure until you have processed all the ingredients.

For Soy Milk

A maximum of 2 oz./50g of dry soy beans can be processed with
max. 2 cups/ 500 ml water. Soak soy beans for 4 hours before
processing them.

For Fruit Juices and Cocktails

For best results, add approximately 1 1/4 cup/300 ml water (or
other liquid for cocktails, etc.) to 5 oz./150g fruit.

1

Cleaning of the Blender parts and the accessories is easiest 

if done immediately after use.

2

Never clean the accessories or the parts in the dishwasher.

3

The motor unit may be cleaned using a moist cloth. Never 

immerse motor base in water.

4

Rinse and dry each piece thoroughly.

CAUTION: Handle the cutting blades with extreme care and 
caution.They are sharp and may cause injury.

5

Do not use abrasives, scourers, alcohol, etc.

Blender Jar

6

Never clean the glass jar with water hotter than 140ºF/60ºC.

7

Quick cleaning: assemble the blender jar on motor unit and 

pour lukewarm water and a few drops of dishwashing liquid
into the blender jar.

8

Assemble the lid and the stopper.

C

9

Let the appliance run for a few moments by pressing the “M”

Pulse/Quick Clean button, then immediately release this
button. Repeat a couple of times.

10

Press the OFF (O) button.