Russell Hobbs RHDW1 사용자 설명서
1.
Press the Power On/Off
button.
2.
Select the program suiting your
dishes via the Program Selection
button.
button.
3.
Start the program pressing
the Power Start/Pause
button.
Switching on the machine
Program follow-up
You can follow the program flow using the program follow-up lambs located on the control panel.
You can follow the program flow using the program follow-up lambs located on the control panel.
Changing a programme
If you would like to change programs while a washing program is continuing.
If you would like to change programs while a washing program is continuing.
SWITCHING ON THE MACHINE AND SELECTING A PROGRAMME
21
Press the Power
Start/Pause key.
Start/Pause key.
Do not open the cover before
the lamp Finished is on.
the lamp Finished is on.
Once the program is over, the
End light is illuminated.
End light is illuminated.
As long as Washing and Drying goes
on the Washing/Drying lamp
on the Washing/Drying lamp
is lit.
When drying is active
the machine
stays silent about 40-50 minutes
After the program stops, select
your desired program via the
Program selection button.
your desired program via the
Program selection button.
Start the program you have
newly selected by pressing
again the Start/Pause key.
newly selected by pressing
again the Start/Pause key.
The new program started
will resume the course of
the old program.
will resume the course of
the old program.
Once the Power On/Off key
is pressed, the lamp Power
Start/Pause is highlighted.
is pressed, the lamp Power
Start/Pause is highlighted.
The lamp on Program Start/Pause
button
goes off once the Program starts and
the washing/Drying lamp is highlighted.
the washing/Drying lamp is highlighted.