Russell Hobbs RHDW1 사용자 설명서
If one of program monitor lights is on and
the start/Pause light flashes on and off,
Your machine’s door is open, shut the door.
If the programme won’t start
If the programme won’t start
•
Check if the plug is connected.
•
Check your indoor fuses.
•
Be sure that the water inlet tap is turned on.
•
Be sure that you have closed the machine door.
•
Be sure that you switched off the machine by pressing the Power On / Off button.
•
Be sure that the water inlet filter and the machine filters are not clogged.
If the “Wash/Dry” and “End”
lights keep flashing
•
Water overflow alarm is active
•
Turn off your tap and contact an authorised service.
If the control
light won’t go out after a wash operation
The Power On/Off button is released yet.
If detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment was wet.
If detergent residues are left in the detergent compartment
Detergent has been added when the detergent compartment was wet.
ERROR CODE
Wash /Dry
Wash /Dry
End
Start/Pause
ERROR
DESCRIPTION
DESCRIPTION
CONTROL
Inadequate water
supply
•
Make sure the water input tap is totally open and that
there is no water cut.
there is no water cut.
•
Close the water input tap, separate the water input
hose from the tap and clean the filter at the connection
end of the hose.
hose from the tap and clean the filter at the connection
end of the hose.
•
Restart your machine, contact the service if the error
resumes.
resumes.
Error of continuous
water input
•
Close the tap.
•
Contact the service.
The waste water in the
machine cannot be
discharged.
•
Water discharge hose is clogged.
•
The filters of your machine might be clogged.
•
Power off-on your machine and activate the program
cancellation command.
cancellation command.
•
If the error continues, contact the service.
Intended water
temperature could not
be reached faulty
heater and heater
sensor
temperature could not
be reached faulty
heater and heater
sensor
Contact the service.
Alarm is active against
water overflow
water overflow
•
Power off your machine and close the tap.
•
Contact the service.
Faulty electronic card
Contact the service.
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
25