Smeg STC700 사용자 설명서

 

 

 
 
 
 
  
 

 

 

The dishwasher is capable of signalling a number of faults through the 
simultaneous illumination of several indicator lights, with the following 
meanings: 

 

 

Water heating malfunction 
The water is not heated or the heating parameters 
are not correct. Repeat the washing program; if the 
problem persists, contact the after-sales service. 

Water temperature monitoring malfunction 
Interrupt the program and switch off the dishwasher. 
Switch the dishwasher back on, program it again and 
start the washing cycle. If the problem persists, 
contact the after-sales service. 

 

Water intake malfunction 
The appliance does not take in water or does not do 
so correctly. Check that the water connections are 
correct, the water intake tap is turned on and the filter 
is not fouled. If the problem persists, contact the 
after-sales service. 

 

Water pump-out malfunction 
The appliance does not pump out the water or does 
not do so correctly. Check that the drain hose is not 
kinked or crushed and that the siphon and filter are 
not fouled. If the problem persists, contact the after-
sales service. 

 

Turbine flow-regulator malfunction  
(for the relevant models only) 
The appliance is not able to "measure" the amount of 
water loaded accurately. Interrupt the program and 
switch off the dishwasher. Switch the dishwasher 
back on, program it again and start the washing 
cycle. If the problem persists, contact the after-sales 
service. 

 

Water intake system malfunction 
Contact the after-sales service.