Saeco Coffee Makers HD8775 사용자 설명서

49

49

Machine actions 

Causes 

Solutions

The machine grinds the 
coff ee beans but no coff ee 
comes out.
(See note) 

There is no water.

Fill the water tank and prime the 
circuit (see "Using the Machine for 
the First Time" chapter).

The brew group is dirty.

Clean the brew group (see "Weekly 
Cleaning of the Brew Group" chap-
ter).

The circuit is not primed.

Prime the circuit (see "Using the 
Machine for the First Time" chapter).

This might occur when the ma-
chine is automatically adjusting 
the dose.

Brew a few cups of coff ee as 
described in the “Saeco Adapting 
System” chapter.

The dispensing spout is dirty.

Clean the dispensing spout.

The beverage is too weak.
(See note)

This might occur when the ma-
chine is automatically adjusting 
the dose.

Brew a few cups of coff ee as 
described in the “Saeco Adapting 
System” chapter.

The beverage is brewed 
slowly.
(See note)

The coff ee grind is too fi ne.

Change coff ee blend or adjust the 
grind as explained in the “Adjusting 
the Ceramic Coff ee Grinder” chapter.

The circuit is not primed.

Prime the circuit (see "Using the 
Machine for the First Time" chapter).

The brew group is dirty.

Clean the brew group (see "Weekly 
Cleaning of the Brew Group" chap-
ter).

Coff ee leaks out of the dis-
pensing spout.

The dispensing spout is clogged.

Clean the dispensing spout and its 
holes.

The lower part of the dispensing 
spout is not correctly positioned.

Position the lower part of the dis-
pensing spout correctly.

 Note: 

* These problems can be considered normal if the coff ee blend has been 
changed or if the machine has just been installed. In this case wait until the 
machine performs a self-adjusting operation as described in the "Saeco 
Adapting System" chapter.