Bunn MCPA 사용자 설명서

9

1. Remove the lid and 

water reservoir.

(CAUTION: Do not place the brewer in 

a sink or other water source.)

8. Place a mug or bowl that 

will hold at least 414 ml (14 

fl. oz.) onto the drip tray 

grate.

4. Replace the reservoir and lid 

and close the slide lid.

9. Press and release 

the coffee brew 

button to fill the 

internal  water 

tank.*

5. To ensure the Pod Holder  

is locked in place, use 

thumb to press the pod 

holder release button to 

eject the holder and then 

press all the way in to 

lock. 

(CAUTION: Water may not immediately flow 

from the brewer. Never remove pod holder 

from brewer during a brew cycle.)

(CAUTION: You should hear a clicking sound 

when the pod holder locks in place.)

6. Slide the volume 

control lever to 

the maximum 

setting.

7. Plug in the brewer 

and turn on the 

power switch.

11. Press and release  

the coffee brew  

button a second 

time.*

(CAUTION: Water should flow from the pod 

holder. Wait until water drip out has finished 

before removing the pod holder.)

P2901

P2904

P2902

P2907

P2908

P2907

P2952

P0214/2905

10. Empty any water in the mug or bowl and  

place the mug back on the drip tray grate.

You are now finished preparing the brewer 

for it’s first use. Proceed to the “Brewing 

Delicious Coffee Or Tea” section.

2. Thoroughly rinse the water reservoir.

3. Fill the reservoir to the 

maximum line with 

    fresh cold water.

P3017

* Some noise is normal when the water pump is running.

(NOTE: Wait for Heating Indicator to go out 

before proceeding to Step #11)