Capresso Coffeemaker 사용자 설명서

다운로드
페이지 6
A LA CARTE button. Push the button and change the
strength by turning the ROTARY DIAL (
XMILD
MILD
NORMAL
STRONG
,
XSTRONG
). Now push the ROTARY
DIAL. During grinding turn the Dial to set the cup size.
D) Changing the Grinder Fineness
Important: 
You can only adjust the fineness during the 
actual grinding process.
1. Open the bean container lid and turn the dial while grinding:
    larger dots: coarser; smaller dots: finer.
2. For darker, oily beans, grind somewhat coarser. For lighter
    beans, grind somewhat finer. 
E) Using Hot Water (factory setting is 5 oz.)
Place a cup underneath the Hot Water Spout and turn the
SELECTOR SWITCH to the right. 
WATER PORTION
. To stop
the hot water flow turn the SELECTOR SWITCH to the left. 
F) Frothing and Steaming with the DUAL FROTHER PLUS
(Using the frothXpress PLUS system see section "N").
Important: All frother parts must be tightly connected and clean.
1. Cappuccino: One shot espresso plus ~4 oz. of steamed 
   and frothed milk. Metal frother sleeve DOWN.
2. Latte: One shot espresso plus ~4 to 5 oz. of steamed milk. 
   Metal frother sleeve UP.
3. If the red lights in the steam buttons are ON, immerse 
   the frother into a pitcher with milk and push the 
    PERMANENT STEAM button. 
DRAW OFF STEAM
    Steam pushes into the milk ( if the steam buttons are not 
   illuminated, see chapters 16.6 Operating Instructions).
a) Push the STEAM button to stop. 
SELECT PRODUCT
   To continue steaming push the STEAM button again. 
b) After steaming you can immediately brew coffee. 
   Important: Knocking Noise during Frothing: The machine 
    pumps water droplets for steam. This is normal. 
    Please note: Skim and 1% milk will produce more froth 
    than 2% and regular milk.
   To increase milk temperature, frother sleeve should be UP. 
G) Cleaning the Frother
Should be done right after use, takes less than 15 sec.!
Place a large cup underneath the frother. Push the PERMANENT
STEAM 
button. After 5 sec. push the button again to stop.
H) Programming
Factory Settings:
• 1-cup Espresso: 2 oz., strong
• 2-cup Espresso: 2 oz./cup, strong
• 1-cup Coffee: 5 oz., strong
• 2-cup Coffee: 5 oz./cup, strong
• All cup buttons are set to temperature HIGH.
• Hot Water: 5 oz.
• Steam Portion: 14 seconds
All other settings see chapter 5, Operating Instructions.