Panasonic AW-PH650N 사용자 설명서

25

Concerning the connectors inside the housing

The connectors shown in the figure below are provided inside the housing. Check the connection instructions for each of the 
cameras concerned, and connect them.











This is provided for controlling the zooming and focusing 
of the motorized lens unit. Connect the remote (zoom/
focus) control cable of the motorized lens unit to this 
connector.



This is provided for controlling the ND filter or lens 
extender of the motorized lens unit. Connect it when 
using a motorized lens unit with an ND filter or lens 
extender function.



Connect this when using a Canon IAS lens, WAS lens or 
VAS lens or a Fujinon RD lens.

Check that the lens can be stowed inside the housing, 
because some lenses cannot be stowed according to 
the position of the connector on the bottom the lens.



Set the LENS I/F (2) control selector switch to the 
position that corresponds to the lens used.

Fujinon:  RD lens made by Fujinon
Canon:   IAS lens, WAS lens or VAS lens made by 

Canon



This is provided for controlling a camera. Connect it to 
the camera REMOTE connector using the camera cable 
supplied with the AW-PH650.



Camera

Switch setting

Convertible camera

HRP

AK-HC900 series

HRP

AK-HC1500

Control exercised 

from HRP150

Control exercised 

from CB400

HRP

CB400

•  Use this switch at the HRP setting when using a 

convertible camera. It cannot be controlled from the 
AK-HRP150. Use a camera controller for a convertible 
camera.

•   Similarly, use the switch at the HRP setting when using 

the AK-HC900 series. It cannot be controlled from the 
AW-CB400. Use the AK-HRP150.

•   When using the AK-HC1500, there is a need to select 

the switch using the camera controller used. 
Set the switch to the HRP setting when exercising 
control from the AK-HRP150 or at the CB400 setting 
when exercising control from the AW-CB400.



