Mellerware 2650DA 사용자 설명서

• The speed of the appliance can be regulated by 

using the speed regulator control (D). This func-

tion is very useful, as it makes it possible to adapt 

the power of the appliance to the type of work 

that needs to be done.

• The speed control can be used for the desired 

function as is described in the accessories sec-

tion.

1.  The appliance’s operating time can be con-

trolled.

2.  To set an operating time simply select it by us-

ing the time selection buttons (G) to a maxi-

mum of 10 minutes, with 10 second intervals. 

By keeping “+” or “-” pressed, the selected 

time will change more quickly.

3.  The programmed time or remaining time will be 

shown on the LED display (F).

4.  By selecting the desired speed the LED display 

will show the remaining time in 1 second 

intervals.

5.  The time and operating of the appliance can 

be paused by moving the selector knob to “0”. 

Time and operating will resume once the speed 

has been selected again.

6.  Once the programmed time has elapsed, the 

appliance will stop. Move the selector knob to 

“0”.

7.  To change the set time move the selector knob 

to “0” and press “+” or “-” to reset the desired 

time. Once selected, reset the desired operat-

ing speed.

8.  To reset the timer, select “0” and then press 

both select time buttons at the same time until 

00:00 is shown on the LED display.

9.  If a specific operating time has not been set, the 

LED display will show the time elapsed since 

the operating speed was selected.

1.  Turn off the appliance by selecting 0 on the 

speed regulator.

2.  Unplug the appliance to the mains.

3.  Put the cable back in the cable housing.

4.  The cable housing enables the cable to be 

stored and pulled out to the required length for 

operating the appliance, preventing hazardous 

situations.

5.  Take off the lid.

6.  Press the connect/disconnect button of the up-

per part, while raising the upper part.

7.  Remove the bowl from the base by turning it in 

an anti-clockwise direction.

8.  Clean the appliance

• This accessory is used for whipping cream, stiff-

ening egg whites, making smoothies, light cakes, 

meringues, mousses and soufflés.

• Do not use this accessory for mixing heavy 

masses (e.g. fat and sugar) as it may damage 

the appliance.

• Use the speed control to gradually increase until 

reaching the maximum setting.

• Note: minimum quantity of 3 eggs, maximum 

quantity of 12.

• This accessory is used for mixing food, making 

biscuits, pasta, fillings and mashed potatoes. 

• It is recommended that intermediate speeds are 

used from 2-6, depending on the type of mixes.

• This accessory is used for kneading bread, pizza 

dough and dense cakes.

• Do not use speeds greater than 1.

• Maximum quantity of flour: 1,200 gr.

• The appliance has a safety device, which pro-

tects the appliance from overheating.

• If the appliance turns itself off and does not 

switch itself on again, disconnect it from the 

mains supply, and wait for approximately 15 

minutes before reconnecting. If the machine 

does not start again seek authorised technical 

assistance.

• Disconnect the appliance from the mains and let 

it cool before undertaking any cleaning task.

• Clean the equipment with a damp cloth with a 

few drops of washing-up liquid and then dry.

• Do not use solvents, or products with an acid or 

base pH such as bleach, or abrasive products, 

for cleaning the appliance.

• Do not let water or any other liquid get into the air 

vents to avoid damage to the inner parts of the 

appliance.

• Do not submerge the appliance in water or any 

other liquid, or place it under a running tap.

• It is advisable to clean the appliance with a 

damp(not wet) cloth regularly and remove any 

food remains. The bowl, splash guard, spatula 

and attachments  are suitable for cleaning with 

hot soapy water.

• After washing, dry all the parts before fitting them 

together and storing.

• - Take the appliance to an authorised technical 

support service if problems arise. Do not try to 

dismantle or repair without assistance, as this 

may be dangerous.