Sunrise Global CM250 IP 사용자 설명서
Chapter 3
Using PC-IP Software
15
SOFTWARE OVERVIEW
The PC-IP software allows to direct interfacing with the Install
Profiler via the RS-232 connection. It provides the ability to
download saved data, check the Install Profiler configuration,
download, upload and edit channel tables, configure the cable
modem, select the automated tests to perform and set the pass/
fail limits and to clone one Install Profiler’s configuration into
other Install Profilers.
Profiler via the RS-232 connection. It provides the ability to
download saved data, check the Install Profiler configuration,
download, upload and edit channel tables, configure the cable
modem, select the automated tests to perform and set the pass/
fail limits and to clone one Install Profiler’s configuration into
other Install Profilers.
General Setup
Accesses general system functions such as General
Information, Communications settings, Detail Screen
Access settings, Auto Save settings, Install Profiler
System Information, the current Database in use and
controls to Get or Send the configuration information
to the Install Profiler.
Information, Communications settings, Detail Screen
Access settings, Auto Save settings, Install Profiler
System Information, the current Database in use and
controls to Get or Send the configuration information
to the Install Profiler.
Cable Modem Setup
Accesses parameters used in the cable modem ranging
and registration process. Access is provided to setup
the Downstream Ranging method, Network Settings,
General Setup, Upstream measurement configuration,
Downstream measurements configuration, and
controls to Get or Send the configuration information
to the Install Profiler.
and registration process. Access is provided to setup
the Downstream Ranging method, Network Settings,
General Setup, Upstream measurement configuration,
Downstream measurements configuration, and
controls to Get or Send the configuration information
to the Install Profiler.
Channel Tables Setup
Modifies any of the pre-set channel tables (including
Standard, IRC and HRC) or creates custom channel
tables and to downloads or uploads them to the Install
Profiler. In addition to channel table information, the
user may configure the channels used for Pilots, set
the Downstream Ranging Channels, set the Active
Channel Plan and get or send the configuration
information to the Install Profiler.
Standard, IRC and HRC) or creates custom channel
tables and to downloads or uploads them to the Install
Profiler. In addition to channel table information, the
user may configure the channels used for Pilots, set
the Downstream Ranging Channels, set the Active
Channel Plan and get or send the configuration
information to the Install Profiler.