Sunrise Global CM250 IP 사용자 설명서
PC-IP Software
User’s Manual
28
CHANNEL TABLE SETUP
The Channel Table Selection screen is shown in the Figure 4-2.
Clicking on the Channel Table Icon accesses this screen.
Clicking on the Channel Table Icon accesses this screen.
A total of 15 built-in plans are provided. Each plan is displayed
in a series of Windows™ controlled by the tabs displayed across
the top of the window screen. Three basic channel plans covering
Cable Channels 2 through 135 are available including Standard,
HRC and IRC plans. Three user programmable channel tables
and 9 International plans are also provided. All plans may be
edited as desired.
in a series of Windows™ controlled by the tabs displayed across
the top of the window screen. Three basic channel plans covering
Cable Channels 2 through 135 are available including Standard,
HRC and IRC plans. Three user programmable channel tables
and 9 International plans are also provided. All plans may be
edited as desired.
The complete Standard, HRC and IRC Channel plans are loaded
in the PC-IP software when it is opened. These can be downloaded
to the Install Profiler or used as a starting point for editing.
in the PC-IP software when it is opened. These can be downloaded
to the Install Profiler or used as a starting point for editing.
Figure 4-2
Getting Channel Tables from the Install Profiler
The current channel table can be downloaded from the Install
Profiler to the PC (Figure 4-2) where editing can be performed
and the new channel table uploaded back to the Install Profiler.
Or you can start with the default channel plan in the PC-IP
software, modify it as required and then send it to the Install
Profiler.
Profiler to the PC (Figure 4-2) where editing can be performed
and the new channel table uploaded back to the Install Profiler.
Or you can start with the default channel plan in the PC-IP
software, modify it as required and then send it to the Install
Profiler.