Sunrise Global CM250 IP 사용자 설명서
PC-IP Software
User’s Manual
46
Location
Figure 4-23
Three test locations are provided, each with their own set of
limits. Select a Location Tab before selecting the Tests type:
Analog, Digital Video or Cable Modem.
limits. Select a Location Tab before selecting the Tests type:
Analog, Digital Video or Cable Modem.
Setting Limits
To set the limits for a location, click on the Limits icon from the
main menu bar. The window will display the limits for the three
locations: Tap, Ground Block, and Set-Top. Click on any location
tab to modify the tests performed and the limits for each test. The
suggested limits for each location are pre-set. However, you
may change these limits to better suit your system’s needs. Click
on an Analog, Digital Video or Cable Modem to set the limits for
a location. Limits are displayed on test results graphic screens as
yellow boxes that indicates the acceptable or “passing” range for
a test result as shown in the figure below.
main menu bar. The window will display the limits for the three
locations: Tap, Ground Block, and Set-Top. Click on any location
tab to modify the tests performed and the limits for each test. The
suggested limits for each location are pre-set. However, you
may change these limits to better suit your system’s needs. Click
on an Analog, Digital Video or Cable Modem to set the limits for
a location. Limits are displayed on test results graphic screens as
yellow boxes that indicates the acceptable or “passing” range for
a test result as shown in the figure below.
Selecting Tests
The desired tests may be selected from the list of tests by clicking
on the bullet in front of the desired test, as shown in the figure
4-23. Clicking on a selected test will de-select the test. The
following tests are available:
on the bullet in front of the desired test, as shown in the figure
4-23. Clicking on a selected test will de-select the test. The
following tests are available: