Sunrise Global CM250 IP 사용자 설명서
PC-IP Software
User’s Manual
56
CLONE UTILITY
The Clone feature is effectively copies all of the configuration
information from one Install Profiler to one or more Install
Profilers. This ensures that all of your Install Profilers are
identically configured. Prepare the complete Install Profiler
configuration setup before you begin the clone process. Check
the Install Profiler setup on the network to verify that it ranges
and registers properly and that the proper limits are set.
information from one Install Profiler to one or more Install
Profilers. This ensures that all of your Install Profilers are
identically configured. Prepare the complete Install Profiler
configuration setup before you begin the clone process. Check
the Install Profiler setup on the network to verify that it ranges
and registers properly and that the proper limits are set.
The typical procedure for cloning is:
1.
Configure the initial Install Profiler using the General
Setup, Channel Table, Cable Modem and Limits functions
to completely set up the initial Install Profiler.
Setup, Channel Table, Cable Modem and Limits functions
to completely set up the initial Install Profiler.
2.
Verify the Install Profiler configuration setup.
3.
Use the Clone function to quickly and reliably configure
additional identical Install Profilers.
additional identical Install Profilers.
To open the Clone feature as shown in the figure below, simply
click on the CLONE icon in the main Task Bar and the CLONE
UTILITY window will be displayed.
click on the CLONE icon in the main Task Bar and the CLONE
UTILITY window will be displayed.
Figure 4-29