Sunrise Global CM250 IP 사용자 설명서

PC-IP Software 

When the Scan icon is in color, it means that the current file is 
a Scan saved file and can be viewed and analyzed by clicking on 
the icon. When the icon is selected, a window (Figure 5-4) 
displays the Scan saved data. The Technician name, type of file 
and File Name and Location will be displayed in the upper right 
area of the screen. The location indicates the current set of Limits 
criteria used for the Pass/Fail analysis: Set-Top, Ground Block, 
Tap. The display automatically configures itself to best display 
the type of signal that is being measured, according to the 
Channel Table data and measurement levels. 

Scan is an automated test mode with a quick and 
comprehensive set of tests on all of the channels in the 
currently active channel table. The Install Profiler steps 
through the channel table and measures the video and audio 
or digital carrier level of each active channel, displays the 
measurements graphically on the screen and builds a data 
table with the measurement results in tabular form. The 
measurement results are also compared to the Limits criteria 
stored in memory in the Limits Setup screen. See the Limits 
Setup section. Measurements, which fall within the Limits 
criteria, will be displayed in their normal colors; measurements 
outside of the Limits criteria will be displayed in red. Set the 
appropriate Location prior to initiating Scan so that the 
appropriate Limits criteria is used to qualify the test results.