Sunrise Global CM250 IP 사용자 설명서
PC-IP Software
User’s Manual
78
Ingress
Figure 5-13
Figure 5-13 shows the typical recalled ingress display. Markers
provide the frequency indication and level where the marker is
positioned. Markers 2 and 3 are fixed to the points where the
measurements were made when the test results were saved. A
blue cursor is also provided, which may be moved by clicking
and holding down on the button while dragging the cursor to the
desired location.
provide the frequency indication and level where the marker is
positioned. Markers 2 and 3 are fixed to the points where the
measurements were made when the test results were saved. A
blue cursor is also provided, which may be moved by clicking
and holding down on the button while dragging the cursor to the
desired location.
The technician name, type of file and file name are displayed in
the upper right area of the screen. The display will automatically
configure itself to best display the type of signal that is being
measured
the upper right area of the screen. The display will automatically
configure itself to best display the type of signal that is being
measured
Bar Graphs – Bar graphs are displayed of the signal within the
spectrum.
spectrum.
Vertical Scale - The vertical scale is auto ranging and may be
changed by clicking on the scale and dragging it to the desired
range.
changed by clicking on the scale and dragging it to the desired
range.
Plot - The Plot area of the display provides the range for the
vertical and horizontal scale of the bar graph display. The left
box is the beginning channel of the horizontal axis. The right box
is the ending channel on the horizontal axis. The top box is the
vertical and horizontal scale of the bar graph display. The left
box is the beginning channel of the horizontal axis. The right box
is the ending channel on the horizontal axis. The top box is the