ADIC 601354 사용자 설명서

4-28

Normal Operations

601354 Rev A

Receiving archive media class capacity - Fill level = Amount of media that can be 
entered

In the last three cases, the DataTower moves excess media to its 
Eject port. 

Unsolicited Enter of 
Unknown Media

The DataTower archive supports the unsolicited media enter 
operation. An unsolicited media enter operation is performed 
without VolServ system GUI interaction. 

During an unsolicited media enter operation, media are placed 
in the DataTower load port, followed by pushing a button above 
the load port. The archive robot reads the media labels and 
sends the media identifiers to VolServ. If any of the media in 
the load port are shown as checked-out by VolServ, the setting 
of the auto check-in parameter determines the action taken by 
VolServ.

If media to be entered are not labeled, the Reprint Media Label 
command can be used to print individual barcode labels or 
smaller, human-readable-only paper labels. Refer to 

 for more information.

There are four prerequisites for using this method: 

•

Each medium must have a barcode label affixed to it. The 
Reprint Media Label command can be used to print 
individual barcode labels. Refer to 

 for more information.

If media action modes are set for migrate, media migration can 
occur if an unsolicited enter results in fill levels exceeding the 
media type or archive media class high marks.