ADIC 601354 사용자 설명서

601354 Rev A

Troubleshoot

6-13

What steps should be 
taken when auditing an 
entire DataTower archive 
and discovering that a 
duplicate media identifier 
(ID) exists, but the status 
and the Media Location 
query only list one 
location?

To bring the duplicate into the tower 
database and to provide a location, 
remove the medium from the location 
indicated in the status window and the 
Media Location query. Then repeat the 
audit on the tower archive. This action 
brings the duplicate into the tower 
database and provides a location.

A Mount Media command 
was issued, but a 
hardware error occurred. 
After the problem was 
corrected, the command 
was reissued and failed, 
but the medium was found 
in the drive.

Mount Media commands are suspended 
until executed if a hardware failure occurs. 
The second request fails and causes the 
Cassette Load Mechanism (CLM) to be 
varied OffLine and the drive is unavailable 
for other mounts. Use the Manual Eject 
command to remove the medium, 
physically remove the medium, and vary 
the CLM to the OnLine state. Reenter the 
medium using the Unsolicited Enter 
operation.

Why does Release 2.0 not 
support the priority and 
optional CAPs of a 
StorageTek ACS product 
family archive?

It does. However, as media are entered 
into the StorageTek ACS product family 
archive with either of these CAPs, the 
media is not recognized as entered until a 
remap audit is performed.