Epson M00001901 사용자 설명서

 16/25 

©

SEIKO EPSON CORPORATION 2008-2009. All rights reserved. 

 

This menu can be opened by selecting Device, Configuration, and then the TCP/IP tab. 

 

 

 

The TCP/IP menu helps you configure the TCP/IP settings on the 

network interface

. 

The following table explains in detail how this menu works. 

 

Item

 

Explanation

 

Select the method for assigning an IP address. The choices here vary depending 

on the network interface. 

If you select Automatic, a different IP address is assigned to the network 

interface every time you turn on the device. If you do not have a DHCP server with 

DNS support, select Manual here and specify an IP address directly. 

If you select Automatic when DHCP,  BOOTP, and RARP are all grayed out, 

TMNet WinConfig will obtain an IP address from the server by automatically 

determining the server type. 

If this check box is selected, a private IP address is automatically assigned to the 

network interface by APIPA (Automatic Private IP Addressing) when there is no 

DHCP server on the network or there is no response from the DHCP server. The 

private IP address will be in the range of 169.254.0.1 to 169.254.255.254. 

This check box is grayed out if the IP Address Setting is set with Manual or 

APIPA is not supported. 

Select this check box when setting an IP address using the ARP/PING command.