Yamaha 006IPTO-F0 사용자 설명서
Selecting Fader Modes
35
DM1000 Version 2—Owner’s Manual
3
Operating Basics
Selecting Fader Modes
The function of channel faders (1–16) depends on the selected Layer and Fader mode.
2 Press the FADER MODE [FADER/AUX] button to select a Fader
mode.
• When the [FADER]indicator
lights up: .............................................. You can use channel faders to
control Input Channel levels or
Output Channel (Aux Out 1–8,
Bus Out 1–8) master levels.
Output Channel (Aux Out 1–8,
Bus Out 1–8) master levels.
• When the [AUX] indicator
lights up: .............................................. You can use channel faders to control Input
Channel Aux Send levels.
The following table shows the channel fader functions for each Layer and Fader mode.
LAYER buttons
Fader Mode
Channel Strip Fader
1–8
9–16
[1-16] button
Fader
Input Channels 1–16 level
Aux
Input Channels 1–16 Aux Send level
[17-32] button
Fader
Input Channels 17–32 level
Aux
Input Channels 17–32 Aux Send level
[33-48] button
Fader
Input Channels 33–48 level
Aux
Input Channels 33–48 Aux Send level
[REMOTE 1] button
Fader
Aux
No operation
No operation
[REMOTE 2] button
Fader
Aux
No operation
No operation
[MASTER] button
Fader
Aux Send master 1–8
output level
output level
Bus Out master1–8 out-
put level
put level
Aux
No operation
No operation
Note: You cannot select Aux mode while the Master layer is selected. If you switch to the Master
layer while the FADER MODE [AUX] indicator is lit, the indicator automatically turns off
and the [FADER] indicator lights up.
layer while the FADER MODE [AUX] indicator is lit, the indicator automatically turns off
and the [FADER] indicator lights up.
FADER MODE
FADER
AUX