Yamaha 006IPTO-F0 사용자 설명서

Chapter 5—Analog I/O & Digital I/O

The DM1000 rear panel features OMNI OUT connectors 1–12 for 
connecting line-level sources, such as a monitoring system, master 
recorder, external effects processor. The OMNI OUT connectors use 
balanced XLR-3-32-type jacks, with a rated output level of +4 dB.

These outputs can be patched to Bus Outs and Input Channel Direct 
Outs. (See page 113 for more information on patching outputs to the 
Omni Outs.)

The DM1000 rear panel features digital input and output connectors that enable you to 
connect external digital devices. Any signal path can be patched to these digital inputs and 
outputs.

You can also add analog and digital I/Os by installing optional I/O cards in Slots 1 and 2.

These connectors accept signals from a DAT or other 2-track digital recorder or consumer 
format digital audio device.

2TR IN DIGITAL 1 uses an XLR-3-31-type connector and accepts 
AES/EBU format digital audio.

2TR IN DIGITAL 2 is an RCA phono connector and accepts con-
sumer format (IEC-60958) digital audio.

You can patch signals input at these connectors to any Input Chan-
nels (see page 114). You can monitor these inputs via the Control 
Room monitors by using the MONITOR [2TR D1] and [2TR D2] 
buttons.

These connectors output signals to a DAT or other 2-track digital recorder or consumer for-
mat digital audio device.

2TR OUT DIGITAL 1 uses an XLR-3-32-type connector and outputs 
AES/EBU format digital audio.

2TR OUT DIGITAL 2 is an RCA phono connector and outputs con-
sumer format (IEC-60958) digital audio.

You can patch outputs to Bus Outs and Input Channel Direct Outs 
(see page 114).

These slots allow you to install optional mini-YGDAI (Yamaha General Digital Audio Inter-
face) I/O cards. These cards offer AD/DA conversion, and various analog I/O options and 
digital I/O interfaces in all the popular digital audio interconnect formats, including 
AES/EBU, ADAT, and Tascam. You can patch signals input at these card connectors to any 
Input Channels or Insert Ins (see page 110).

You can patch the card outputs to Bus Outs or Input Channel Direct Outs (see page 115).