Frymaster BK1814 사용자 설명서

다운로드
페이지 50
 DANGER 
Improper installation, adjustment, maintenance or service, and unauthorized alterations or 
modifications can cause property damage, injury, or death.  Read the installation, operating and 
service instructions thoroughly before installing or servicing this equipment.  Only qualified 
service personnel may convert this appliance to use a gas other than that for which it was 
originally configured.  See Chapter 1 of this manual for definition of qualified service personnel. 
 
 DANGER 
Adequate means must be provided to limit the movement of this appliance without depending 
upon the gas line connection.  All fryers equipped with casters must be stabilized by installing 
restraining chains.  If a flexible gas line is used, an additional restraining cable must be 
connected at all times when the fryer is in use. 
 
 DANGER 
The front ledge of the fryer is not a step.  Do not stand on the fryer.  Serious injury can result 
from slips or contact with the hot oil. 
 
 DANGER 
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any 
other appliance. 
 
 DANGER 
Instructions to be followed in the event the operator smells gas or otherwise detects a gas leak 
must be posted in a prominent location.  This information can be obtained from the local gas 
company or gas supplier. 
 
 DANGER  
The crumb tray in fryers equipped with a filter system must be emptied into a fireproof container 
at the end of frying operations each day. Some food particles can spontaneously combust if left 
soaking in certain shortening material.  Additional information can be obtained in the filtration 
manual included with the system. 
 
 WARNING  
No structural material on the fryer should be altered or removed to accommodate placement of 
the fryer under a hood.  Questions?  Call the Frymaster Dean Service Hotline at 1-800-551-8633. 
 
 WARNING 
Do not bang fry baskets or other utensils on the fryer’s joiner strip.  The strip is present to seal 
the joint between the frypot.  Banging fry baskets on the strip to dislodge shortening will distort 
the strip, adversely affecting its fit.  It is designed for a tight fit and should only be removed for 
cleaning.