Electrolux EOB66714 사용자 설명서

 electrolux 47

Any permanent electrical installation must
comply with the latest I.E.E. Regulations
and local Electricity Board regulations.
For your own safety this should be
undertaken by a qualified electrician, e.g.
your local Electricity Board, or a
contractor who is on the roll of the
National Inspection Council for Electrical
Installation Contracting (NICEIC).

Electrical Connection
The oven is designed to be connected to
230 V (50 Hz) electricity supply.
The oven has an easily accessible
terminal block which is marked as follows:

Letter L

-

Live terminal

Letter N

-

Neutral terminal

 or E

-

Earth terminal

THIS OVEN MUST BE

THIS OVEN MUST BE

THIS OVEN MUST BE

THIS OVEN MUST BE

THIS OVEN MUST BE
EARTHED.

EARTHED.

EARTHED.

EARTHED.

EARTHED.

The cable used to connect the oven to
the electrical supply must comply to the
specifications given below.
It is necessary that you install a double
pole switch between the oven and the
electricity supply (mains), with a
minimum gap of 3mm between the
switch contacts and of a type suitable
for the required load in compliance with
the current rules.
The switch must not break the yellow and
green earth cable at any point.