Insys GSM 4.2 I4 11-02-01-03-01.038 사용자 설명서
제품 코드
11-02-01-03-01.038
INSYS GSM 4.2 I4
Functions and their configuration
58
Dez-06
Query via DTMF
The DTMF PIN controls the access to query the inputs via DTMF tones during a voice con-
nection. The DTMF PIN consists of 4 digits.
The DTMF PIN controls the access to query the inputs via DTMF tones during a voice con-
nection. The DTMF PIN consists of 4 digits.
Configure the passwords and the DTMF PIN
1.
Start the HSComm and switch to the tab "Access control".
2.
To configure a password, click on the button "Set password" in the group "Pass-
word for" at the desired password.
word for" at the desired password.
A dialog box to enter the password is opened.
3.
Enter the password.
The password is sent to the device.
4.
Activate the control box "Password active" next to the requested password.
Pertinent AT commands
AT**PASS
Password
6.3.10 Security callback
The security callback process:
1.
If a security callback number was entered, the device will query the password for
all connections and terminate the connection.
all connections and terminate the connection.
2.
If the password was correct, the device will establish a new connection to the se-
curity callback number after 30 seconds.
curity callback number after 30 seconds.
3.
When this connection is established, the message CALLBACK IN PROGRESS is sent
after 2 seconds. After further 2 seconds the interface is free for data transmission.
after 2 seconds. After further 2 seconds the interface is free for data transmission.