Insys GSM 4.2 I4 11-02-01-03-01.038 사용자 설명서
제품 코드
11-02-01-03-01.038
INSYS GSM 4.2 I4
Functions and their configuration
Dez-06
61
Date/Time
Time stamp of the internal clock
Time stamp of the internal clock
Pertinent AT commands
AT**HISTORY
Read out history list
6.5
Audio Interface and Voice Connections
The device has a standard RJ45 phone plug at the front to connect a phone handset of
reference type Handset Siemens Gigaset (see Chap. 2.4.5).
reference type Handset Siemens Gigaset (see Chap. 2.4.5).
The connection is set up and closed either by AT commands in the terminal program or
by an accordingly configured alarm input ("Medium for alarm transport: Voice" see Chap.
6.3.3).
by an accordingly configured alarm input ("Medium for alarm transport: Voice" see Chap.
6.3.3).
Pertinent AT commands
ATD<nr>;
Set-up voice connection
ATH
Terminate connection
ATA
Accept call
6.6
Flash update
You can update the device firmware locally or via a data connection. The firmware is
available as *.MHX file from the technical support department.
Call technical support at:
available as *.MHX file from the technical support department.
Call technical support at:
E-mail: insys@insys-tec.de
0941/560061
0941/560061
Local flash update
1.
Set the baud rate of the terminal to 19200 bps, as the responses are operated us-
ing this baud rate. (see Chap. 6 )
ing this baud rate. (see Chap. 6 )
2.
Hardware handshake must definitely be activated.
Remote flash update
1.
Set the baud rate of the device to 19200 bps to prevent a crash of the flash up-
date.
date.
2.
Hardware handshake must definitely be activated on the
terminal side
remote terminal modem
3.
At the terminal program that initiates the flash process, set a line delay of at least
100 ms (carriage return character TX=CR).
100 ms (carriage return character TX=CR).
The duration of the remote flash is approx. 5 minutes.