Electrolux 241927600 사용자 설명서

Maintenance

•     For best performance, keep the unit out of 

direct sunlight.

•     Turn the unit OFF and dispose of any ice 

cubes if the unit will not be used for 5 days 
or more. Prop door open to allow for air 
circulation and prevent mold and mildew.

•     If the ambient temperature is expected to 

drop below 45°F (7°C), drain all water from 
the unit to prevent freezing damage not 
covered by the warranty.

•     High ambient temperatures, 110°F (43°C) or 

higher, may reduce the unit’s ability to reach 
low temperatures and may also reduce the 
ice production rate.

Periodic cleaning and proper maintenance will 
ensure efficiency, top performance, and long 
life. The maintenance intervals listed are based 
on normal conditions. You may want to shorten 
the intervals if you have pets or other special 
considerations.

The door, grille and cabinet may be cleaned with a 
mild detergent and warm water solution. Do not use 
solvent based or abrasive cleaners.

Use a soft sponge and rinse with clean water. Wipe 
with a soft, clean towel to prevent water spotting.

•    Stainless steel models may discolor when 

exposed to chlorine gas, pool chemicals, salt 
water or cleaners with bleach.

•    Keep your stainless unit looking new by 

cleaning with a high quality, all-in-one 
stainless steel cleaner/polish on a monthly 
basis. Frequent cleaning will remove surface 
contamination that could lead to rust. Some 
installations will require cleaning on a weekly 
basis.

•    DO NOT CLEAN WITH STEEL WOOL PADS.
•    DO NOT USE CLEANERS THAT ARE 

NOT SPECIFICALLY INTENDED FOR 
STAINLESS STEEL (this includes glass, tile 
and counter cleansers).

•    If any surface discolors or rusting appears, 

clean it quickly with Bon-Ami or Barkeepers 
Friend Cleanser and a non-abrasive cloth. 
Always clean in the direction of the grain. 
Always finish this process with a high quality, 
all-in-one stainless steel cleaner/polish to 
prevent further problems.

•    USE OF ABRASIVE PADS SUCH AS 

SCOTCHBRITE WILL CAUSE THE 
GRAINING IN THE STAINLESS TO 
BECOME BLURRED.

•    Rust that is allowed to linger can penetrate 

into the surface of the stainless steel and 
become impossible to remove.

•     DO NOT use solvent cleaning agents or 

abrasives on the interior.  These cleansers 
may transmit taste to the ice cubes, or 
damage or discolor the interior. 

•     DO NOT use any cleaner on the evaporator 

plate other than Ice Machine Cleaner. 
Other cleaners may affect ice quality, 
or cause damage to the unit that 
is not covered under warranty. See 
AUTOMATIC CLEAN CYCLE for more 
information.

1     Disconnect power to the ice maker.
2     Open the door and remove any ice from the 

storage bin.

3     Wipe down the interior and storage bin with 

a solution of non-abrasive mild soap or 
detergent and warm water. Rinse with clean 
water.

4     Sanitize the bin with a solution of 1 

tablespoon of bleach in 1 gallon of warm 
water. Rinse thoroughly with clean water.

5     Check that all drain connections are in place.

6     Reconnect power to the unit.