Panasonic KX-TD816 사용자 설명서
User Programming
User Manual
71
Before entering the user programming mode
Before entering the user programming mode, confirm that:
•
Your telephone is on-hook, and
•
No calls are on hold at your telephone.
Entering the user programming mode
To enter the User Programming mode:
•
The display shows the Initial Message:
USR-PGM NO?
Note
•
If nothing is entered within five seconds after the PROGRAM button is pressed,
programming mode is canceled.
programming mode is canceled.
•
During the programming mode, your extension is treated as a busy extension.
•
Only one proprietary telephone can be in programming mode at any one time.
•
The User Programming Password is not shown on the display for security reason. The
password can be changed by System Programming.
password can be changed by System Programming.
Programming Guide References
[120] User Password
In this section, programs [001] through [004] are explained. Please consult with your dealer
when you need to change the following programs:
when you need to change the following programs:
•
[005] Flexible CO Button Assignment
•
[006] Operator / Manager Extension Assignment
•
[007] DSS Console Port and Paired Telephone Assignment
•
[008] Absent Messages
•
[009] Quick Dial Number Set
•
[012] ISDN Extension Number Set
•
[013] ISDN Extension Name Set
•
[014] VM Name Set
Press PROGRAM + +
+
User Programming Password (default:1234)