Troy-Bilt Automatic Lawn Tractor 사용자 설명서

10

The throttle control lever is located on the right side of 
the tractor’s dash panel. This lever controls the speed 
of the engine and, on some models, when pushed all 
the way forward, the choke control also. When set in a 
given position, the throttle will maintain a uniform 
engine speed. See Figure 6. 

 When operating the tractor with the cutting 

deck engaged, be certain that the throttle lever is 
always in the FAST (rabbit) position.

On some models, moving the 
throttle lever all the way forward 
activates the engine’s choke 
control. On all other models, the 
choke control can be found on 
the left side of the dash panel and 
is activated by pulling the knob 
outward. Activating the choke 
control closes the choke plate on 
the carburetor and aids in starting 
the engine. Refer to Starting The Engine in the 
OPERATION section of this manual for detailed starting 
instructions.

The brake pedal is located on the 
right front side of the tractor 
above the drive pedal along the 
running board. The brake pedal 
can be used for sudden stops or 
setting the parking brake. 

•   GO UP AND DOWN SLOPES, NOT ACROSS. 
•   AVOID SUDDEN TURNS.
• DO NOT OPERATE THE UNIT WHERE IT COULD SLIP OR TIP.
• IF MACHINE STOPS GOING UPHILL, STOP BLADE(S) AND BACK

DOWNHILL SLOWLY.

• DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.
• NEVER CARRY CHILDREN, EVEN WITH BLADES OFF.
• LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.
• KEEP SAFETY DEVICES (GUARDS, SHIELDS, AND SWITCHES) IN

PLACE AND WORKING.

• REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE(S).
• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.
• BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE PLAC-

ING HANDS OR FEET NEAR BLADE(S).

• BEFORE LEAVING OPERATOR’S POSITION, DISENGAGE

BLADE(S), PLACE THE SHIFT LEVER IN NEUTRAL, ENGAGE
BRAKE LOCK, SHUT ENGINE OFF AND REMOVE KEY.