Vermont Casting LHERDV30 사용자 설명서
14
10004894
LHEDV Series Direct Vent Insert
Flame Adjustment (RN/RP Models)
For fireplaces equipped with HI/LO valves, flame
adjustment is accomplished by rotating the HI/LO
adjustment knob located near the center of the gas
control. (Figs. 24 or 25)
adjustment is accomplished by rotating the HI/LO
adjustment knob located near the center of the gas
control. (Figs. 24 or 25)
��
��
Turn
counterclockwise
to decrease
flame height
Turn clockwise
to increase
flame height
HV102
Honeywell hi/lo knob
4/5/99 djt
Fig. 24 Flame adjustment knob for Honeywell Valve.
Honeywell Valve
Large Lava Rock Placement
The large lava rock provided with this fireplace should
be placed on the firebox base on either side of the
burner assembly.
be placed on the firebox base on either side of the
burner assembly.
Under no circumstances should these
lava rocks be placed on top of the burner
assembly.
lava rocks be placed on top of the burner
assembly.
e. Place the burner lava rock on the
front area of the burner housing.
(Fig. 22)
(Fig. 22)
LHECDV30, LHERDV30 (Fig. 23)
a. Place the rear center log (KR24).
Use the log's bottom holes to lo-
cate it onto the two (2) pin studs
of the rear log bracket on the
center.
cate it onto the two (2) pin studs
of the rear log bracket on the
center.
b. Place rear left log (KR22). Use
the log's bottom holes to locate it
onto the two (2) pin studs of the
rear log bracket on the left.
onto the two (2) pin studs of the
rear log bracket on the left.
c. Place rear right log (KR23). Use
the log's bottom holes to locate it
onto the two (2) pin studs of the
rear log bracket on the right.
onto the two (2) pin studs of the
rear log bracket on the right.
d. Place the front left log (KR25).
Position the log notch against the
second grate from the left, and
the other edge of the log on top
of the rear left log notch. Ensure
the log is secure in place.
second grate from the left, and
the other edge of the log on top
of the rear left log notch. Ensure
the log is secure in place.
e. Place the front right log (KR26).
Position the log notch against the
third grate from the right, and the
other edge of the log on top of
the rear right log notch. Ensure
the log is secure in place.
third grate from the right, and the
other edge of the log on top of
the rear right log notch. Ensure
the log is secure in place.
f. Place the burner lava rock on the
front area of the burner housing.
(Fig. 23)
(Fig. 23)
LG286
LHEDV30
Logs
4/03
KR22
KR25
KR24
KR23
KR26
Burner Lava
Rock
Fig. 23 LHEC30 and LHER30 log and lava rock placement.
Front Grate
LG286
LG285
LHEDV20
logs
4/03
JR9
JR7
JR8
JR10
LG285
Burner Lava Rock
Fig. 22 LHEC20 and LHER20 log and lava rock placement.
Front Grate
LO
HI
FP390
FLAME ADJUSTMENT KNOB
11/21/96
Turn
counterclockwise
to increase
flame height
Turn clockwise
to decrease
flame height
Fig. 25 Flame adjustment knob for SIT valve.