Sony STR-DA5300ES 사용자 설명서

will be output from the sub woofer if the digital 
input signal contains L.F.E. signals, or if the front or 
surround speakers are set to “SMALL,” the sound 
field for movie is selected, or “Portable Audio” is 
selected.

x Distance 

You can adjust the distance from the seating 
position to each speaker (front left/right, 
center, surround left/right, surround back left/
right, sub woofer).
You can adjust the distance from 1.0 meter to 
10.0 meters in 1 cm steps.

x Size 

You can adjust each speaker’s (front left/right, 
center, surround left/right, surround back left/
right) size.

• LARGE

If you connect large speakers that will 
effectively reproduce bass frequencies, 
select “LARGE.” Normally, select 
“LARGE.”

• SMALL

If the sound is distorted, or you feel a lack of 
surround effects when using multi-channel 
surround sound, select “SMALL” to activate 
the bass redirection circuitry and output the 

bass frequencies of each channel from the 
sub woofer or other “LARGE” speakers.

• The “LARGE” and “SMALL” settings for each 

speaker determine whether the internal sound 
processor will cut the bass signal from that 
channel.
When the bass is cut from a channel, the bass 
redirection circuitry sends the corresponding bass 
frequencies to the sub woofer or other “LARGE” 
speakers.
However, since bass sound has a certain amount of 
directionality, it is best not to cut it, if possible. 
Therefore, even when using small speakers, you 
can set them to “LARGE” if you want to output the 
bass frequencies from that speaker. On the other 
hand, if you are using a large speaker, but prefer not 
to have bass frequencies output from that speaker, 
set it to “SMALL.”
If the overall sound level is lower than you prefer, 
set all speakers to “LARGE.” If there is not enough 
bass, you can use the equalizer to boost the bass 
levels.

• The surround back speakers will be set to the same 

setting as that of the surround speakers.

• When the front speakers are set to “SMALL,” the 

center, surround, and surround back speakers are 
also automatically set to “SMALL.”

• If you do not use the sub woofer, the front speakers 

are automatically set to “LARGE.”

x Position 

Lets you specify the location of your surround 
speakers for proper implementation of the 
surround effects in the Cinema Studio EX 
modes. This setup item is not available when 
there are no surround speakers.