Honeywell HR150 사용자 설명서

5

69-0994—4

The control fan speed is conveniently located on the ventilator. The rotary fan speed 

control knob can be manually set from the off (standby) position through speeds 1 to 4. 
Note the fifth speed (high) is accessible only by a remote control.

Off/standby mode may be used if intermittent ventilation is desired. In the off/standby 
position, the ventilator will not function until energized by a remote control, see 

information below.

It is up to the individual homeowner to set their system to a speed which they find 

comfortable. If you feel your house is stuffy or there is an above average occupancy 

rate, you may need to increase your ventilation. In most applications a low to medium 
speed setting is comfortable.

Your ventilator comes equipped with a low voltage terminal strip for connection to 
several optional control devices.

PERFECT CLIMATE COMFORT CENTER™ CONTROL 
The Honeywell Perfect Climate Comfort Center™ unit controls your ventilator 

automatically by using the programmed times or manually by pressing the Ventilate 
key. See the Perfect Climate Comfort Center™ users guide (form 69-0891) for 

complete instructions.

POWER CORD

4-SPEED CONTROL
WITH STANDBY POSITION

RECOMMENDED 
MAINTENANCE

M11704A

PRODUCT 
IDENTIFICATION LABEL*

*

NOTE: THIS INFORMATION IS VERY IMPORTANT WHEN MAKING

             INQUIRIES ABOUT YOUR ERV.