Cabletron Systems FRX4000 사용자 설명서

Configuring LLC2

7-23

SNA Status and Configuration

This Þeld associates a Subscriber ID with the LLC2 host. Enter a number up to 15 
digits. An asterisk wildcard can be used as a Þnal digit (but the ? wildcard is not 
valid). If fewer than 15 digits are entered, an asterisk must be the Þnal character.

The Routing Subscriber ID partially deÞnes the Local Subscriber ID in the 
Connections Table deÞned for each LLC2 host (see 

).

This parameter is used to identify the FRX and SmartSwitch 1800 to inbound 
frames from a local LAN in an Originated LLC2 session. (If you have selected 
Terminated as your Session Type, this Þeld will be grayed out.)

Source address masks and host MAC addresses are placed in a forwarding list 
that is checked by the Þrmware when a frame is received. If the MAC address in 
an incoming frame matches a conÞgured Source MAC Address Mask, the frame 
will be passed through the node for transmission out the frame relay interface.

Enter an address up to eight hexadecimal digits. The Þrst digit must be 4, 5, 6, or 
7, and an asterisk wildcard can be used as a Þnal digit. If fewer than eight actual 
digits (not including an asterisk) are speciÞed, zeros will be added to total eight 
actual digits. This value must not conßict with the Locally Administered MAC 
Address described in your FRX and SmartSwitch 1800 hardware documentation.

This read-only Þeld deÞnes the LLC2 interface number associated with this host 
entry and will always be 300.

You can edit the values in any Þeld which provides a text box or menu button 
selection; to do so:

1.

To edit a text field, remove the existing value and enter the new value.

2.

To edit a field with a menu button, click on the button to display a list of 
options, then drag down to select the option you want.

If you have made changes to the fields but would like to revert back to the 
previous values, click on the Refresh button.

3.

Click on 

 to save your changes.