Cabletron Systems FRX4000 사용자 설명서

Configuring the Subscriber Table

4-6

Adding or Modifying Subscriber Table Entries

If you have selected any redirect parameters for a Subscriber Table entry, you 
must use the Address Table to designate the alternate subscriber addresses that 
will be used by the redirect option(s) you have selected (see 

 for more 

information on redirect options). You can designate up to Þve alternate addresses 
for each subscriber table entry.

Each address table entry requires the following values:

The index value assigned to the address table entry. Some redirect options use this 
value to determine the order in which alternate addresses are selected. Allowable 
values are 1 - 5; values need not be assigned sequentially.

Use the address Þeld to enter the Subscriber ID for any alternate subscribers you 
wish to associate with the selected subscriber table entry. These alternate 
addresses will be used by any enabled redirect options to determine alternate 
paths for call requests directed to the selected subscriber. Note that you cannot 
use wildcard characters in this Þeld.

To add or modify a subscriber table entry:

1.

If you wish to modify an existing entry, be sure that entry is highlighted in the 
Subscriber Table portion of the window.

2.

In the Subscriber Table portion of the window:

a.

Enter the appropriate Subscriber ID value. You can use up to 15 digits, 
including the question mark (?) and asterisk (*) wildcards. For subscribers 
using a Public Data Network (PDN), be sure the ID you assign follows the 
code specifications for that network.

b.

In the Algorithm field, select the means by which any alternate routing 
paths assigned to this subscriber will be selected. (Alternate routing paths 
are assigned via the  Routing Table, as described in step 3.) If you do not 
wish to employ one of the available algorithms, simply accept the default 
value and assign only a single routing path.