Jenn-Air W10728796A 사용자 설명서

Pressing any Home Screen touch pad (Fridge, Freezer or Options) 
will turn off the audio alarm and indicator light. The audio alarm 
will not sound again for the current condition that caused the 
alarm until a new condition occurs.
An Alarm Reset can be performed by pressing any Home Screen 
touch pad (Fridge, Freezer or Options), or by turning the power to 
the refrigerator off and on again. See “Power On/Off Switch.” After 
performing an Alarm Reset, the indicator light will reactivate if the 
condition that caused the alarm is still present. See “Door Open,” 
“Over Temperature” or “Power Outage.” 

An alarm will sound when a door has been open for longer than 
5 minutes. Closing the door or drawer, or pressing any Home 
Screen touch pad (Fridge, Freezer or Options) will reset the Door 
Open feature and turn off the audio alarm.
NOTE: If the door(s) or drawer are left open for 10 minutes the 
interior lights will go out. Closing the open door(s) or drawer will 
reset the lights.

IMPORTANT: If the Over Temperature Alarm activates, your food 
may spoil. See “Power Interruptions.” Minimize door openings 
until temperatures return to normal.
The Over Temperature feature is designed to let you know when 
either the refrigerator temperature rises above 48°F (9°C) or the 
freezer temperature rises above 15°F (-9°C) for longer than 
1

¹⁄₂ hours. The audio alarm will shut off automatically when the 

temperature returns to normal, but the indicator light will continue 
to flash to let you know that an Over Temperature condition 
occurred until an Over Temperature reset has been performed. 
Press any Home Screen touch pad (Fridge, Freezer or Options) to 
turn off the indicator light.
If the over temperature condition is still present when an Over 
Temperature reset is performed, the indicator light will continue to 
reactivate every 1

¹⁄₂ hours until refrigerator and freezer 

temperatures are below 48°F (9°C) and 15°F (-9°C), respectively.

When a power outage occurs, a Power Outage indicator light will 
be displayed. Press any Home Screen touch pad (Fridge, Freezer 
or Options) to turn off the indicator light. The power outage 
indicator light will not display when either Cooling Off or Sabbath 
Mode is active, but will appear after exiting Sabbath mode if a 
power outage occurred.    

IMPORTANT: After connecting the refrigerator to a water source 
or replacing the water filter, fill and discard two full containers of 
ice to prepare the water filter for use, before using the ice. 

1. To turn on the ice maker, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is 
made, the ice cubes will fill the ice storage bin and the ice 
cubes will raise the wire shutoff arm to the OFF (arm up) 
position. Do not force the wire shutoff arm up or down. 

2. To manually turn off the ice maker, lift the wire shutoff arm to 

the OFF (arm up) position and listen for the click.

NOTE: It is normal for ice to stick together in the ice bin. It is 
recommended that the ice bin be emptied and cleaned as 
needed.
To clean the ice storage bin:    

1. Slide the ice bin out of the freezer and lift up and out.
2. Empty the ice bin. Use warm water to melt the ice if 

necessary. 
NOTE: Do not use anything sharp to break up the ice in the 
bin. This can cause damage to the ice bin and the dispenser 
mechanism.

3. Wash ice bin with warm water and a mild detergent, rinse well 

and dry thoroughly. Do not use harsh or abrasive cleaners or 
solvents.

■

Allow 24 hours to produce the first batch of ice.

■

It may take 3 to 4 days for the ice bin to completely fill, if no 
ice is used. 

■

The quality of your ice will be only as good as the quality of the 
water supplied to your ice maker.

■

Avoid connecting the ice maker to a softened water supply. 
Water softener chemicals (such as salt) can damage parts of 
the ice maker and lead to poor quality ice. If a softened water 
supply cannot be avoided, make sure the water softener is 
operating properly and is well maintained.

■

It is normal for the ice cubes to be attached at the corners. 
They will break apart easily.

■

Do not store anything inside the ice bin.

The water filter indicator, located on the control panel, will help 
you know when to change the water filter. 
A replacement water filter should be ordered when “Order Filter” 
is displayed. It is recommended that you replace the filter when 
“Replace Filter” is displayed or when water flow to your water 
dispenser and/or ice maker decreases noticeably. See “Changing 
the Water Filter” later in this section.
After changing the water filter, press and hold FILTER RESET for 
3 seconds until the the “Order Filter” or “Replace Filter” indicator 
light disappears. 

The water filter is located in the base grille below the freezer 
compartment door. It is not necessary to remove the base grille to 
remove the filter.
1. Remove the filter by pressing the eject button and pulling 

straight out on the filter cap.

Do not use with water that is microbiologically unsafe or of 
unknown quality without adequate disinfection before or 
after the system.