Jenn-Air W10329370A 사용자 설명서

다운로드
페이지 58
8
Adjust the Doors
IMPORTANT:
Your refrigerator has two adjustable, front leveling screws – 
one on each side of the refrigerator base. If your refrigerator 
seems unsteady or you want the door to close easier, use the 
instructions below.
Before moving the refrigerator, raise the leveling screws so the 
front rollers are touching the floor. 
1. Remove the base grille. Grasp the grille firmly and pull it 
toward you.
2. Raise or lower the cabinet. 
Using a 
¹⁄₄" hex driver, turn the leveling screw on each side to 
raise or lower that side of the refrigerator.
NOTE: Having someone push against the top of the 
refrigerator takes some weight off the leveling screws. This 
makes it easier to turn the screws. It may take several turns of 
the leveling screw to adjust the tilt of the refrigerator.
To raise, turn the leveling screw clockwise.
To lower, turn the leveling screw counterclockwise. 
3. Open the door again to make sure that it closes as easily as 
you like. If not, tilt the refrigerator slightly more to the rear by 
turning both leveling screws clockwise. It may take several 
more turns, and you should turn both screws the same 
amount.
4. Replace the base grille.
REFRIGERATOR USE
Opening and Closing Doors
There are two refrigerator compartment doors. The doors can be 
opened and closed either separately or together.
There is a vertically-hinged seal on the left refrigerator door.
When the left side door is opened, the hinged seal 
automatically folds inward so that it is out of the way.
When both doors are closed, the hinged seal automatically 
forms a seal between the two doors. 
Using the Controls
IMPORTANT: 
The control panel is located on the front of the ice and water 
dispenser. 
To access the main control menu, press any of the four touch 
pads located on either side of the display. Then, touch the pad 
next to the desired option or user setting to access the various 
features.
NOTE: Press only the touch pads next to your selection on the 
display screen, not the selection itself. 
Wait 24 hours for your refrigerator to cool completely before 
adding food. If you add food before the refrigerator has cooled 
completely, your food may spoil.
NOTE: Adjusting the refrigerator and freezer temperature 
controls to a colder than recommended setting will not cool 
the compartments any faster.
The recommended settings should be correct for normal 
household refrigerator use. The controls are set correctly 
when milk or juice is as cold as you like and when ice cream is 
firm.
If the temperature is too warm or too cold in the refrigerator or 
freezer, first check the air vents to be sure they are not 
blocked before adjusting the controls.  
A. Leveling screw
A
A. Hinged seal
A. Touch pads
A
A
A