Marshall electronic MXL V67Q 사용자 설명서

다운로드
페이지 3
Thank you
 for purchasing the MXL V67Q Stereo studio-record-
ing microphone.  MXL microphones are the result of world-class 
engineering and manufacturing capabilities.  They are designed to 
provide you with outstanding performance and exceptional value.  
With proper care, this mic will provide many years of satisfaction.  
For best results, please take a few moments to review this literature.
General Characteristics
This microphone has two 20 mm gold diaphragm capsules in an 
X/Y pattern for stereo recording.  The capsule behind the “L” is 
more sensitive to sound waves arriving from the left side of the 
microphone as opposed to those arriving from the right side.  The 
capsule behind the “R” is just the opposite. To achieve true stereo 
sound, each channel must be panned to its respective left or right 
side.
Power Requirements
IMPORTANT – This microphone requires phantom power at 48 
volts, +/- 4 volts.  Phantom power must be supplied to the left 
channel (white shrink tube) in order for the microphone to receive 
power.  No damage will be done if phantom power is also supplied 
to the right channel (red shrink tube), but the microphone will not 
function if phantom power is supplied only to the right channel 
(red shrink tube).
Isolation Mount
An OPTIONAL MXL-57 shock mount can be purchased for this 
microphone.  It is a high isolation shock mount used to reduce 
rumble and other unwanted vibrations transmitted through the mic 
stand. Contact your local MXL dealer for purchasing information.
www.mxlmics.com
www.mxlmics.com
Microphone Cables
A special 10 foot cable is included with the microphone.  This 
cable has a 5 pin connection on one end and two XLR con-
nections on the other and is required for stereo microphones.  
The left channel is designated by a white shrink tube while 
the right channel is designated by a red shrink tube.  The 
microphone cable can have a profound effect on the sound 
of any microphone.  Even the finest microphones will sound 
poor if the interconnection cable allows noise to enter, or 
causes distortion and loss of information.  
Care
Dust and foreign material can degrade the performance of a 
microphone over time so always store the unit in its case.  For 
vocals closer than 3”, use a “popper stopper” or a foam wind-
screen to avoid getting moisture on the diaphragm as this can 
substantially degrade the microphone’s performance.  Store 
the microphone in its original packaging, or the included zip-
per pouch.
Warranty
Marshall microphones are guaranteed against defects in mate-
rial and workmanship for three years from date of purchase.  
Should you encounter any problem with this unit, promptly 
contact the company you purchased it from for assistance.  
The original dated sales receipt will be necessary for any 
warranty claim.  Do not send any unit directly to us without 
prior authorization from our service department!  Warranty 
coverage is limited to repair or replacement (at our option) of 
the microphone, and does not cover incidental damages due 
to use of this unit, nor damage caused by accidental misuse of 
this product.