Maytag W10285880A - 8336411962010 사용자 매뉴얼

NOTE: Not all appliance bulbs will fit your beverage center. Be 
sure to replace the bulb with one of the same size, shape, and 
wattage.

1. Unplug beverage center or disconnect power.

2. Using a Phillips screwdriver, remove the screw located at the 

back of the light shield. Pull the light shield back to remove 
the tabs from the appliance. Remove the light shield.

3. Replace the bulb.

4. Reinstall the light shield by inserting the tabs. Align the holes 

and insert the screw. Tighten the screw.

5. Plug in beverage center or reconnect power.

If you choose to turn the beverage center off before you leave, 
follow these steps.

1. Remove all wine bottles from the beverage center.

2. Unplug the beverage center. 

3. Clean the beverage center. See “Cleaning.”

4. Tape a rubber or wood block to the top of the door to prop it 

open far enough for air to get in. This stops odor and mold 
from building up.

When you are moving your beverage center to a new home, 
follow these steps to prepare it for the move.

1. Remove all wine bottles from the beverage center.

2. Unplug the beverage center.

3. Clean, wipe, and dry it thoroughly.

4. Take out all removable parts, wrap them well, and tape them 

together so they don’t shift and rattle during the move.

5. Tape the doors shut and tape the power cord to the beverage 

center.

When you get to your new home, put everything back and refer to 
the “Installation Instructions” section for preparation instructions.

■

Is the power supply cord unplugged? Plug into a grounded 
3 prong outlet.

■

Has a household fuse blown, or has a circuit breaker 
tripped? Replace the fuse or reset the circuit.

■

Is the Beverage Center Control turned to the OFF 
position? See “Using the Control.”

■

Is a light bulb loose in the socket? Unplug beverage center 
or disconnect power. Gently remove the bulb and reinsert. 
Plug in beverage center or reconnect power.

■

Has a light bulb burned out? Replace with an appliance 
bulb of the same wattage, size, and shape. See “Changing 
the Light Bulb.”