Maytag 61004966 사용자 설명서

Before You Call

For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:

U.S. 1-800-688-9900 or Canada 1-800-688-2002

Moisture on inside cabinet walls

Excessive moisture in crisper

Water dispenser not operating

Cabinet light not working

Front cabinet surface
warm to the touch

Freezer not freezing properly

Sizzling sound in freezer

Visible glow in the freezer vents

Ice dispenser not operating

Ice cubes evaporate

Automatic ice maker not operating

Won’t Run

Runs too long/too frequently

Noisy operation

Odor in cabinet

Warm air from cabinet bottom

Cabinet Vibrates

Check these points if your refrigerator...

• temperature control turned to “Off”
• power cord not plugged in
• no power at the electrical outlet
• circuit breaker tripped or the house fuse blown
• refrigerator is in automatic defrost

• today’s refrigerators are larger and run colder, which requires more running time to

provide more stable temperatures

• prolonged door openings
• base grille blocked
• too many door openings
• door not sealing (due to a package or a container holding door open)

• cabinet not level
• weak floor

• odor producing foods should be covered or wrapped
• interior needs cleaning

• normal air flow for condenser circulation

• cabinet not level
• weak floor

• hot, humid weather
• frequent or prolonged door openings
• door not closed properly

• food not wrapped properly
• hot, humid weather

• bulb burned out
• no power at the outlet

• a normal sound caused by defrost water dripping on defrost mechanism

• appearance of a red glow or reflection is normal during the defrost cycle

• products with high sugar content may not harden completely when frozen (ice

cream, concentrated juice, etc.)

• adjust freezer control to a colder setting

• cold air moving over the ice cubes causes shrinkage, especially with limited usage.

This is normal.

• stop arm in OFF (up) position
• water supply turned off
• water pressure too low
• freezer too warm

• special design to limit condensation during periods of high humidity

• ice jam in the dispenser
• ice maker not operating
• lock switch on

• water supply turned off
• water pressure too low
• lock switch on (see pg. 7)