Siemens HG2528UC 사용자 설명서

Getting Started

English 12

Do not place food directly on oven bottom. Do not use aluminum foil or 
protective liners to line any part of an appliance, especially surface unit 
drip bowls or oven bottom. Installation of these liners may result in a risk 
of electric shock or fire.

The oven vent is located below the display above the rear left cooktop burner. It is 
normal to see steam escaping from the vent and condensation may collect on the 
backguard and cooktop. This area may become hot when the oven is in use. To 
prevent carbon monoxide build-up, do not block the vent. The oven vent is also 
important for air circulation. 

To prevent carbon monoxide build-up, do not block appliance air vents.

The oven will automatically shut off after 12 hours (24 hours if the time format is 
set for 24 hour in the Select Function section).

The oven features a self-cleaning function that eliminates the manual labor 
involved with cleaning your oven. 

Beep - Signals that more information must be entered or confirms the receipt of 
an entry. A Beep also signals the end of a program or an oven error.

End-of-Cycle Indicator - To indicate when a mode is finished, 3 consecutive 
beeps will sound.

Default Settings - The cooking modes automatically select the default tempera-
ture. These can be changed when a different one is needed.

Flashing Symbol or Number - Signals an incomplete setting and calls for 
another step or START to be pressed.

F Number Codes -These codes display when there is a problem with the range.

The convection fan operates during any convection mode, including dehydrate. 
When the oven is operating in the convection mode, the fan will turn off automati-
cally when the door is opened. The convection fan does run during self-clean, 
although not at the beginning of the mode.