Uniden UM425 VHF DSC 사용자 설명서

다운로드
페이지 68
How It Works
14
Table 5 - Normal mode status messages
Message
Meaning
GPS Data OK The radio is receiving valid GPS data.
Check GPS
The radio is not receiving valid GPS data: check the GPS status screen and 
the GPS connection.
Input Position The radio has been unable to receive valid GPS data for at least four hours; 
it can no longer track your position. You need to manually input your position 
(see Setting the GPS position manually on page 22).
Battery Low
The battery voltage output is too low (below 10.5 VDC).
Battery High
The battery voltage output is too high (above 16.0 VDC).
Triple Watch
Triple Watch is turned on.
Dual Watch
Dual Watch is turned on.
Using the radio in normal mode 
• 
To transmit, press and hold the 
PUSH TO TALK
 button on the 
microphone. Release the button when you are finished talking. 
• 
For the best sound quality, hold the microphone about two inches from 
your mouth while you’re talking.
• 
Press the 
CHANNEL UP
 button on the radio or the
 button on the 
microphone to move up one channel at a time. Press and hold either 
button to scroll quickly up the channels. 
• 
Press the 
CHANNEL DOWN
 button on the radio or the
▼ 
button on 
the microphone to move down one channel at a time. Press and hold 
either button to scroll quickly down the channels. 
• 
To change the transmit power, press the 
1/25W 
button. The transmit 
power switches between 1 watt and 25 watts each time you press the 
1/25W 
button.
UM425 VHF OM.indd   14
28/9/11   11:55:15 AM