Uniden UM425 VHF DSC 사용자 설명서

다운로드
페이지 68
47
Installing the Hardware
When the GPS receiver is correctly connected, the display shows GPS Data 
OK. If there is a problem with the GPS connection, the display shows Check 
GPS. When the display shows GPS Data OK, press the 
SELECT 
button to 
open the GPS status screen and see detailed GPS data:
16
06/20  11:00:00
208
o
    30. 0 KT
 35
o
   40. 610 N
139
o
   46. 564 E
Date
Time
Current 
channel
Course
Latitude
Longitude
Speed
Configuring the GPS
If the radio is receiving valid GPS data, it will automatically set the clock to 
your local time based on the GPS location. You can adjust your local time 
forward or back one hour if necessary (for example, if you are close to the 
border of a time zone); you can also adjust for Daylight Savings Time.
Follow the steps below to adjust the time: 
Display the menu and choose the 
1. 
Setup sub-menu.
Select 
2. 
GPS Setup and then choose Time Adjust.
The display shows your current local time. To adjust the time forward 
3. 
one hour, use the 
CHANNEL UP
 button. To adjust the time back one hour, 
use the 
CHANNEL DOWN
 button. Press the 
SELECT
 button when you are 
finished. 
The display prompts you to confirm the setting: choose 
4. 
Set to save the 
new time or Cancel to exit time setup without saving. The radio returns 
to the GPS Setup menu. 
If your local area observes Daylight Savings Time, highlight
5. 
 Daylight 
Save and press the 
SELECT
 button. 
16
09 
: 14
Time Adjust
Use the up or down 
arrows to adjust the 
time by one hour.
MENU
Setup
SELECT
GPS Setup
SELECT
Time Adjust
SELECT
UM425 VHF OM.indd   47
28/9/11   11:55:22 AM