Standard Horizon GX1280S 사용자 설명서

GX1280S

Page 17

4.9  OPTIONAL CMP25 RAM+ MIC INSTALLATION

1. Connect the RAM+ MIC Cable to the RAM MIC CONNECTOR on the

rear panel, then tighten the Cable Nut (See Figure 3).

2. Referring to Figure 3, make a 1.2” (30 mm) hole in the wall, then insert

the RAM+ MIC Cable into this hole. Connect the Gasket and Mount Base
to the RAM+ MIC Cable Connector using the Nut.

3. Drill the four Screw holes (approx. 2 mm) on the wall, then install the

Mounting Base to the wall using four screws.

4. Put the Rubber Cap on to the Nut. The installation is now completed.

Figure 3. CMP25 RAM+ MIC Instllation

Wall

Gasket

Mounting Bracket

RAM MIC Cable

Cap

Nut