Standard Horizon GX1280S 사용자 설명서
GX1280S
Page 58
9.2.2 Calling
Hold down the [DW] key for 1 second or more, when the “INTERCOM” op-
eration is activated. A calling beep is emitted twice from the transceiver
speaker.
Hold down the [DW] key for 1 second or more, when the “INTERCOM” op-
eration is activated. A calling beep is emitted twice from the transceiver
speaker.
9.3 DSC/RADIO SETUP MODE
The CMP25 can access the DSC / RADIO setup menu (refer to section 7
“DSC/RADIO SETUP” for details). However, the LAMP, CONTRAST, and
KEY BEEP menu item which is accessed from the CMP25 only controls the
CMP25’s display and speaker.
“DSC/RADIO SETUP” for details). However, the LAMP, CONTRAST, and
KEY BEEP menu item which is accessed from the CMP25 only controls the
CMP25’s display and speaker.
DSC/RADIO Setup mode from the CMP25:
1. Press and hold down the [CALL/SET] key until “RADIO SETUP” menu
1. Press and hold down the [CALL/SET] key until “RADIO SETUP” menu
appears.
2. Press the [
]/[] key to select “RADIO SET” or “DSC SETUP” menu.
3. Press the [CALL/SET] key, then select the menu item you wish to work
on by pressing the [
]/[] key.
4. Press the [CALL/SET] key.
5. Press the [
5. Press the [
]/[] key to change the value or condition for the menu
item, then press the [CALL/SET] key to save the new setting.
6. Press the [
]/[] key to select “EXIT,” then press the [CALL/SET] key
to return to the normal operation.
RADIO SETUP-menu
DSC SETUP-menu