VIVOTEK 63E-M 사용자 설명서

 

 

Item LED status

Description

1

Steady red

Power on and system booting

Red LED off

Power off

2

Steady red & Green blinking every 1 sec.

Network normal (heartbeat)

Steady red & Green LED off

Network failed

3

Red blinking every 0.15 sec. & Green blinking 

every 1 sec.

Upgrading firmware

4

Red blinking every 0.15 sec. & Green blinking 

every 0.15 sec.

Restoring default

The reset button is used to reset the system or to restore the factory default settings. Sometimes 

resetting the system can return the camera to normal operation. If the system problems remain 

after reset, restore the factory settings and install again.

Reset: Press and release the recessed reset button with a paper clip or thin object. Wait for the 

Network Camera to reboot.

Restore: Press and hold the recessed reset button for a while to restore. Note that all settings 

will be restored to factory default. 

This network camera is compliant with 

SD/SDHC/SDXC 32GB, 64GB, and other preceding 

standard SD cards.

Ethernet 10/100 RJ45 Plug

Spring Contacts for Dehumidifier

General I/O Terminal Block

Ethernet

DI GND

DI4

DI3
DI2
DI1
DO2

DO1

DO+(12V)

AC24V
AC24V

Reserved

MIC IN

Line OUT

Audio GND

RS485-

RS485+

Interface Section