Garmin 190-01166-02 사용자 설명서

Advanced configuration options are not available on the GHC 10 under normal conditions. To access the advanced configuration 

settings of the GHP 10, use the advanced configuration power-on procedure.

1.  With the power off, press both the center and the right soft keys on the GHC 10.
2.  While pressing the center and the right soft keys, power the GHC 10 on.
3.  Press all 3 buttons until the heading screen appears. Release the buttons.
To make sure the wizards and advanced configuration options are available:

1.  From the heading screen, select 

 > 

.

2.  If the option for 

 is available, you correctly performed the 

advanced configuration power-on procedure.

The Dockside Wizard and the Sea Trial Wizard allow you to quickly define all of the important configuration settings on the GHP 10. 

If, after running the wizards, you do not feel as though the GHP 10 is working correctly, you can run the wizards again at any time. To 

access the wizards, power the GHC 10 on using the advanced configuration power-on procedure.

1.  From the Heading screen, select 

 > 

 > 

 > 

> 

.

2.  Perform the steps as prompted. For more information, see 

1.  From the Heading screen, select 

 > 

 > 

 > 

 > 

.

2.  Perform the steps as prompted. For more information, see 

You can run the Autotune automated configuration process, calibrate the compass, and define north on the GHP 10 through the 

GHC 10 without running the wizards. Additionally, without running the wizards, you can individually define each configuration 

setting. To access the automated configuration settings and the advanced configuration settings, power the GHC 10 on using the 

advanced configuration power-on procedure

1.  From the Heading screen, select  

 > 

 > 

 > 

.

2.  Select 

, 

, or 

.

3.  Perform the steps as prompted. For more information on each automated configuration setting, see 

page 35.

1.  From the Heading screen, select  

 > 

 > 

.

2.  Select the appropriate category of setting you want to configure.
3.  Select the setting you want to configure. Refer to the description of each setting on