Avaya 555-231-743 사용자 설명서
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Translations and Testing
124
Miscellaneous Translations
Administering Analog Caller ID (Switch)
The TN2793B and TN793B analog line circuit packs can be administered to
deliver Incoming Calling Line Identification (ICLID) data to stand-alone analog
Caller ID display units or analog telephones with built-in Caller ID display units.
For this feature to work, the serving central office (CO) must support delivery of
Caller ID information over the trunks that are serving the switch. To administer this
feature, do the following:
deliver Incoming Calling Line Identification (ICLID) data to stand-alone analog
Caller ID display units or analog telephones with built-in Caller ID display units.
For this feature to work, the serving central office (CO) must support delivery of
Caller ID information over the trunks that are serving the switch. To administer this
feature, do the following:
■
Administer the Caller ID system options.
■
Administer stations with Caller ID options.
Administering Caller ID
Use the change system-parameters features command to select the Caller ID
protocol that matches the protocol used by the Caller ID units or telephones, and
to enable display of Caller ID information for room-to-room calls. These options
are set on a system-wide basis. Administer the following options:
protocol that matches the protocol used by the Caller ID units or telephones, and
to enable display of Caller ID information for room-to-room calls. These options
are set on a system-wide basis. Administer the following options:
■
Protocol for Caller ID Analog Terminals
— The available
protocols include:
— Bellcore (default) — US protocol (Bellcore transmission protocol
with 212 modem protocol)
— V23-Bell — Bahrain protocol (Bellcore transmission protocol with
V.23 modem protocol).
■
Display Calling Number for Room to Room Caller ID Calls
— Enter y to display both name and number, or n to display name only.
The information displayed on the telephone may be a security issue for the
customer.
The information displayed on the telephone may be a security issue for the
customer.
change system-parameters features
Page 1 of
10
FEATURE-RELATED SYSTEM PARAMETERS
Self Station Display Enabled? y
Trunk-to-Trunk Transfer: none
Automatic Callback - No Answer Timeout Interval (rings): 3
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20
Automatic Callback - No Answer Timeout Interval (rings): 3
Call Park Timeout Interval (minutes): 10
Off-Premises Tone Detect Timeout Interval (seconds): 20
AAR/ARS Dial Tone Required? y
Music/Tone on Hold: music Port: 01B1101
Music (or Silence) on Transferred Trunk Calls? no
DID/Tie/ISDN Intercept Treatment: attd
Messaging Service Adjunct (MSA) Connected? n
Internal Automatic Answer for Attendant Extended Calls? n
Automatic Circuit Assurance (ACA) Enabled? y
Music (or Silence) on Transferred Trunk Calls? no
DID/Tie/ISDN Intercept Treatment: attd
Messaging Service Adjunct (MSA) Connected? n
Internal Automatic Answer for Attendant Extended Calls? n
Automatic Circuit Assurance (ACA) Enabled? y
ACA Referral Calls: local
ACA Referral Destination: attd
ACA Short Holding Time Originating Extension: 3070
ACA Long Holding Time Originating Extension: 3070
Abbreviated Dial Programming by Assigned Lists? n
Auto Abbreviated/Delayed Transition Interval (rings): 2
Auto Abbreviated/Delayed Transition Interval (rings): 2
Protocol for Caller ID Analog Terminals: Bellcore
Display Calling Number for Room to Room Caller ID Calls? n