Avaya 555-231-743 사용자 설명서

GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations

555-231-743

Issue 1

November 2000

Translations and Testing

198

INTUITY Lodging-to-PMS Translations

Stand-Alone Interface Link

To administer the stand-alone interface link, do the following:

■

Disable the integrated link feature on the switch

■

Install the software on the INTUITY

■

Set up the link on the INTUITY

■

Set up the system parameters on the INTUITY.

To use the hard-wired link between the INTUITY and the PMS (

Figure 10

), you

must first disable the Switch/INTUITY/PMS Link Integration feature. Enter an n in
the

Forward PMS Messages to Intuity Lodging

field.

Then, verify whether the INTUITY system has the Stand-Alone Mode link software
installed and active. Use the Software Management screen to display or change
the available options.

■

If the “Stand-Alone PMS Interface” is currently installed, no changes are
needed.

■

If the “PMS Interface for GuestWorks” is currently active or no interface has
been installed, install the “Stand-alone PMS Interface” option. Follow the
instructions to install the software.

change system-parameters hospitality

Page 1 of 3

HOSPITALITY

     Message Waiting Configuration: act-nopms
   Controlled Restrictions Configuration: act-pms
   Housekeeper Information Configuration: act-pms
   Number of Housekeeper ID Digits: 0

PMS Log Endpoint:

Journal/Schedule Endpoint:

Client Room Coverage Path Configuration: act-nopms
Default Coverage Path for Client Rooms: 1

Forward PMS Messages to Intuity Lodging? n

PMS LINK PARAMETERS

PMS Endpoint: 7899

PMS Protocol Mode: transparent ASCII mode? y

Seconds before PMS Link Idle Timeout: 20

Milliseconds before PMS Link Acknowledgement Timeout: 500
   PMS Link Maximum Retransmissions: 5
   PMS Link Maximum Retransmission Requests: 5
   Take Down Link for Lost Messages? y