Avaya 555-231-743 사용자 설명서

Issue 1

November 2000

Installing the System 

6

Planning and Preparing the Site 

See Chapter 1 in the DEFINITY ECS and INTUITY installation documents for 
more information about the tasks in this section.

1.

Inventory the equipment delivered to the customer site and verify that it 
matches the customer’s order. If the equipment does not match the 
customer’s order, follow the appropriate claims process or report the 
discrepancies to your Avaya representative. If this is a dealer-installed site, 
report the discrepancies to the dealer. 

The equipment may include the following:

■

Switch cabinets and circuit packs

■

Default translation card (GuestWorks and DEFINITY BCS only)

Unless instructed otherwise, always use the default translation card.

■

DEFINITY Site Administration (DSA) software (provided for the 
customer’s PC), or a 715 management terminal

■

Multi-Application Platform (MAP) for INTUITY Lodging Voice 
Messaging, INTUITY AUDIX Voice Messaging, and INTUITY 
Lodging Call Accounting

When using the INTUITY Lodging Call Accounting from Homisco, 
share 

 

with the PMS vendor before or during the switch integration.

■

Xiox™ call accounting equipment, which will be software, a buffer 
box, and a PC

Call Xiox technical support at +1-480-970-9015, +1-602-970-9015, 
+1-603-624-4424, or +1-650-548-5200 if any issues arise about 
their call accounting equipment or installation support.

■

Attendant console

■

Multiappearance telephones (usually the 6400-series 
or 8400-series; a 6424 or 8434 is recommended as the primary 
attendant backup telephone)

■

Guest room telephones

If custom room telephones and faceplates are being ordered, 
coordinate the translations on the switch with any special feature 
access buttons being programmed by the vendor. If programming is 
done ahead of time, this could save time at installation.

■

Modems