Avaya 555-231-743 사용자 설명서
GuestWorks and DEFINITY ECS Release 9
Technician Handbook for Hospitality Installations
Technician Handbook for Hospitality Installations
555-231-743
Issue 1
November 2000
Installing the System
66
Connecting the Hospitality Adjuncts
Okidata Model ML321T Journal/PMS Log
Printer Options
Printer Options
Using the serial interface card (comcode 406940577), option the printer as follows
for a journal or PMS log printer:
for a journal or PMS log printer:
1.
Press SHIFT + SEL to enter the Menu Mode.
2.
Press Print (Park) to print out the Groups and Items. The first Group/Item to
come up will be Printer Control/Emulation Control.
come up will be Printer Control/Emulation Control.
3.
Press SET to option the emulation to ML.
4.
Press GROUP (LF) repeatedly until you come to Serial I/F.
5.
Press ITEM to advance to the next item in this group (Serial I/F) or SET to
change it.
change it.
6.
After changing defaults of an item, press ITEM to advance to the next one.
Set the Serial I/F options for the printer as shown in
Set the Serial I/F options for the printer as shown in
.
Table 7.
Okidata Model ML321T Journal/PMS Log Printer Options
7.
After setting the options, press SHIFT + SEL to save the settings.
Item
Setting
Parity
None
Serial Data 7/8 Bits
8 (if data module)
7 (if DCE port)
7 (if DCE port)
Protocol
X-ON/X-OFF
Diagnostic Test
No
Busy Line
DTR
Baud Rate
9600 (match speed of data
module or DCE port)
module or DCE port)
DSR Signal
Invalid
DTR Signal
Ready on Power UP
Busy Time
200 ms